As a specialized line of work, an Electrician is exposed to a wide range of risks. We look at the best gloves for electricians. As part of their day-to-day, the tasks involve a lot of work with their hands. It is vitally important that these valuable body parts are protected in the workplace.
Electricians Gloves are tested to different standards and for various job settings. We found the Magid Safety M011B9 was best overall glove suited for electrical work because of the protection that these pair offer and their quality feel.
Please note that working with electrical hazards is extremely dangerous. Please make sure that you are trained in the tasks and are aware of the potential dangers. PPE is a last resort measure.
Our site is reader-supported. To maintain the site we may earn commission on sales through our links at no extra cost to you. For further information view our policy.
Top 10 Gloves for Electricians
Magid Safety M011B9 Electrical Gloves
Our number one choice for the perfect pair of gloves for an electrician is the Magid Safety M011B9 Gloves. They are ASTM D120-09 Compliant and class 0. They are Rubber electrical insulating glove.
The glove is 11 inches long with a straight cuff rolled edge. The gloves are dated when they are manufactured.
These electrician gloves are suited for lineman work, electrical contractor, working with high voltage operations. Please check that these gloves are suitable for your line of work by reading the manufacturers safety sheet before using.
We like the feel of the gloves, they are nice and thick. They are available in Black, Red and Yellow colours. The shape of the glove helps to reduce fatigue.
Also, note that these are the insulating glove they are designed to be worn under leather gloves.Check It Out
Electrical Insulated Lineman Rubber Gloves
These lineman inner gloves are designed to as the insulating glove to protect workers. The gloves are shaped to reduce user fatigue.
Made from natural rubber they offer increased durability and comfort.
They are ideal to be worn under leather gloves and to be used by trained professionals such as electricians, lineman and workers operating high voltage machinery.
We would check the sizing on these however as we they only come in one fit and could be too tight for some users.Check It Out
National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Kit
These Safety Apparel Electrical gloves kit includes one pair of class 0 Rubber gloves, on over pair of 10″ leather protector gloves and handy glove bag to transport the gloves.
These are available in sizes from 8-12 to ensure that they are the fit to carry out the work.
These gloves are ideal for electrical contractors, utility workers and Electricians.
The rubber gloves are arc flash compliant.Check It Out
Klien Tools Lineman Work Gloves
The Klien Tools Lineman Gloves mad with Leather and Neoprene, nylon, and spandex made in the US.
They feature 4-inch neoprene cuffs with side vents helping to regulate the temperature of your hands.
They come in four different sizes so matching up to your hand size shouldn’t be difficult. These gloves are in yellow and black color. These gloves would be ideal for electricians carrying out work in colder weather and we found that you could use them to carry out jobs that require more nimble fingers.Check It Out
OTC 3991-12 Hybrid Electric Safety Gloves
These hybrid safety gloves are designed for electricians working near to high voltage vehicles. The gloves come as part of a set.
These gloves are class 0 rated
The inner insulating rubber gloves and outer protecting leather gloves. They are available in three different sizes, their size chart is available on their website. It is worth checking this out as we found the size of the glove to be on the larger side.
As with all thing safety and especially in this working environment the insulating gloves should be tested every six months as a minimum. We liked these gloves, they feel well built.Check It Out
Honeywell GK011B10 Class 0
These Honeywell Class 0 kit includes the rubber insulating gloves, the outer protecting leather glove and a bag to store them.
The leather glove is designed to stop cuts, punctures and abrasions as an outer skin over the rubber glove. The storage bag helps to keep the gloves fit and stops unnecessary wear and tear.
Ensure that they have a dated certifying stamp to work by the current standards.Check It Out
Kevlar Lined Cut Resistant, Arc Flash Safety Work Gloves
These Kevlar cut resistant gloves are available in six sizes. They are ARC flash tested to level 3 designed for spark and flame resistance but not thermal touch.
The ANSI cut level rating is A4 and puncture resistance to ASTM level 3.
These are better suited for general work rather than work on live equipment. They offer good levels of dexterity.Check It Out
SAS Safety 6478 Electric Service Glove Kit
These SAS Safety gloves come as part of a kit. Again these come with the inner rubber glove which offers insulating protection and a pair of leather over gloves.
The set comes with a large carry bag. These are ideal for working on hybrid cars and those working with electric motors.Check It Out
MAGID Linesman Low Voltage Protector Gloves
These Magid linesmen are available in four sizes. They are designed as over gloves for use with rubber electrical insulating gloves. Please note these will have to be bought separately to offer the protection.
They protect to class 0 and 00. The gloves have a pull strap and plastic buckle to get the best fit. They are durable and made of pearl kid leather.Check It Out
Ansell Gloves 113744 Marigold 11″ Class 0
These Ansell Gloves are the insulating gloves designed to be worn under a leather set. They are available in 8 different sizes
They are made from 100% natural rubber and insulate against low voltage up to a maximum of 1000 volts electrical currents.
They have a rolled cuff and offer a good fit.Check It Out
A Guide to Buying Gloves for Electricians
Gloves are one of the essential items found in the electrician’s kit. Just like any other specialty gloves for any task, electrician gloves have been specially designed for the job.
This class of gloves should be made from nonconductors I.e. materials that do not conduct electric current. The material should not be prone to holding moisture. Hence, there electricians’ glove systems tend to be mainly made from two materials: rubber and leather.
Rubber insulating gloves: This group of gloves is designed to shield the electrician from shock hazards. The level of protection and the voltage level they can comfortably withstand vary.
Leather protector gloves: Leather can be added to the glove system to protect the rubber insulation from damage and wear. Leather is also an excellent remedy against abrasion, punctures, cuts, and other mechanically induced damages.
Why should an Electrician Wear Gloves?
Here is why gloves are important to the electrician:
Barrier Against Electrocution and Other Electrical Injuries
The main reason why electrical workers are always reminded to wear gloves is their increased exposure to an electrical current which poses considerable electrocution and shock risk. Electrocution and shock incidents are the biggest scares for any electrical worker, for they often end up in serious injuries or fatalities.
In most cases, electrocution and shock incidences occur when the victim touches a live surface. Wearing the electrician’s gloves is the best measure you can take to avoid your skin coming into direct contact with live surfaces.
Protection from Scratches, Cuts, and Abrasions
Electrical systems are made of pointed wires, sharp pieces of metal, and everything else that could pierce your hands. You don’t want to end up with bloody hands while fixing faulty wiring lines, so you wear the electrician’s gloves at work.
Keep Your Hands Clean
Electrical systems aren’t the cleanest surfaces out there. A whole decade worth of dust, grease, cobwebs, insect and bird’s nests, and everything else that can settle on abandoned surfaces finds its way on electrical systems. It is for your sanitations good, and advisable professional conduct, to wear the electrician’s gloves while completing your duties.
What are the Different Types of Electrician Gloves?
There are six classes of electrician gloves as outlined by OSHA electrical protection guidelines (collectively referred to as 29 CFR 1920.137) Electrical systems carry different levels of voltage.
So electrician gloves are classified by the voltage level they can comfortably handle beyond which electrocution or shock could occur. The second consideration in classifying them is whether or not they’re resistant to ozone. Here is the classification according to voltage:
- Class 00 – The maximum voltage of use is 500V AC/proof tested to 2,500V AC and 10,000V DC
- Class 0 – The Maximum voltage of use is 1000V AC/proof tested to 5,000V AC and 20,000V DC
- Class 1 – The Maximum voltage of use is 7,500V AC/proof tested to 10,000V AC and 40,000V DC
- Class 2 – The Maximum voltage of use is 17,000V AC/proof tested to 20,000V AC and 50,000V DC
- Class 3 – The Maximum voltage of use is 26,500V AC/proof tested to 30,000V AC and 60,000V DC
- Class 4 – The Maximum voltage of use is 36,000V AC/proof tested to 40,000V AC and 70,000V DC
The second scheme of classification is based on ozone resistance. The resistance is broken into Type I and Type II. All Type I gloves offers no resistance to ozone while Type II gloves resist ozone.
It is recommended that a leather protector be added on top of the rubber insulator to provide maximum protection against cuts and abrasions. There are few exceptions though; according to OSHA’s 29 CFR 1910.137 guidelines, part (c)(2)(vii) section (A) – (C), voltage below 250V AC or 375V DC additional leather protector don’t need to be used. You also don’t need an additional leather protector in Class 00 and Class 0 gloves.
How Electrician Gloves can Prevent Shocks
The electrician glove’s trick to preventing electrical shock lies in the material used to make them. They are mainly made from natural rubber which provides excellent electrical insulation.
Sometimes manufacturers opt for synthetic plastics and synthetic rubber. The reason why natural rubber is widely used in electrician gloves is its impressive flexibility and superb grip. While leather may as well protect the user from electrical shocks, it is only added to protect the underlying rubber from abrasions.
The fact that natural rubber starts to conduct electricity at very high voltage necessitates the addition of an extra protector which turns out to be always natural leather.
Other Ways Electrician Gloves Help Protect
Static shocks are less serious shocks that occur as a result of redistribution of numerous electric charges between several materials. Although these shocks are quite harmless, they can be annoying or even painful when they are concentrated in a small area – you’ll understand if your arm has ever come into contact with the USB cable’s tip while plugged in your laptop. When your fingers are on the receiving end, static shocks can be incredibly annoying and the only way to keep them at bay is to wear electrician gloves.
Buying Guide: How to Select Best Electrician Gloves
The market is filled with a wide array of electrician gloves from different manufacturers. There are also different classes of gloves. Here is what to check if you want to select nothing but the best:
Material: Remember to assess the material used to make the gloves. Gloves made from the highest quality natural rubber will be certified accordingly. You may also check if the gloves are nonflammable.
Insulation: Rubber provides the best insulation for electrician gloves. For maximum protection, the gloves should come with leather on top of the rubber. Since the level of protection varies depending on the level of insulation provided by the rubber and leather, choose the gloves that fall in class that suits your needs.
Size and fit: You want to be comfortable while wearing them. Remember to choose gloves that fit the size of your hands.
Work Conditions: If you intend to work in the winter then cotton electricians gloves with cotton coating would be the best for you. Consider the working conditions and pick the right sort of gloves for the job.