The Best Winter Work Gloves to Keep Hands Dry and Warm
The best winter work gloves are essential for workers involved in weather or conditions that expose them to cold or wet conditions. These are an important part of personal protective equipment.
There is nothing worse than cold fingers and hands when working in construction, manufacturing or manual activities. Choosing the correct pair of gloves will provide a warmer working condition and less stress for the wearers.
The gloves need to protect but also offer the same degree of functionality so that the tasks can be performed efficiently. The best winter gloves where the Kinco 1786P Hydroflector
READ: The Best Hard Hat Lights
Best Winter Work Gloves 2020
|Winter Work Glove||Waterproof|
|Kinco 1786P Hydroflector||Yes|
|Knucklehead Unisex Waterproof Gloves||Yes|
|Showa Best 282 Atlas TEMRES||Yes|
|DS Safety Men’s Waterproof||Yes|
|Bellingham SB4601L Snow Blower||Yes|
|Youngstown Glove 11-3285-60-L||Yes- Inner Membrane|
|Magid Glove & Safety TRX540W-L T-REX Arctic Series||Yes|
|Vgo 3M Thinsulate C100 Lined||Yes with waterproof inner insert|
|Men's HydraHyde Winter Work Gloves||Yes|
|Ergodyne ProFlex 925CPWP||Yes|
Kinco 1786P Hydroflector
In our opinion, these were by far the best pair of gloves that we trialed for all-round protection. The waterproofing, windproofing and handling capabilities were the best in each category. We liked that we could still carry out a lot of tasks without the bulkiness of some gloves but still get a decent level of protection from the icy elements. Available in medium-large and extra-large.
These aren’t designed for the coldest conditions though and more for practicality over cold.
If working in extremes there are better choices. If the weather is cold and wet and working for shorter periods, then these gloves are a good choice.Check It Out
Knucklehead Unisex Waterproof Gloves
Second, on the list is the Knucklehead Waterproof Gloves. We think these are a great name for a pair of gloves. These pair of work gloves are well insulated and provide a great barrier against cold weather conditions. They are a good all-round glove protecting against cold and wet weather conditions.
There is also limited padding to prevent small impacts. The antislip patches work well when carrying boxes and other items. The gloves protect against substances like oil and paint.Check It Out
Show Best 282 Atlas Temres
The Showa Best 282 Atlas Temres are next on our list of best winter work gloves. They are one of the best pairs of gloves that we tested in regards to insulation but this may affect dexterity over the course of a working shift.
These work gloves are breathable and water and oil resistant. The colour is smurf blue. When new they do smell but we would forfeit that for the excellent protection they offered us in regards to waterproofing and cold conditions.
The grippy material was ideal when we trialed lifting smaller boxes. One area that we would double-check before ordering is the size as extra-large gloves were a bit tight.Check It Out
DS Safety Men’s Waterproof
These pair of winter safety gloves are double-coated nylon and reinforced with terry cloth with a hycool dipped grip. The combination of material provides waterproofing and warm working gloves.
The glove has great grip qualities in both dry and wet conditions. The big positive is the dexterity of the glove.
The gloves work well in cold weather and can be used in a variety of applications like construction and mechanical work. A small negative was the strong smell left on the hands after wearing but this was far outweighed by the protective qualities in other areas.Check It Out
Bellingham SB4601L Snow Blower
What we like with this pair of Bellingham’s is that they were waterproof resistant. Ideal for blowing snow away as the name suggests but we found that our hands did start to become cold after prolonged use. They are double-dipped PVC coated.Check It Out
When you look at these gloves, the first thing that strikes you first is that they look a quality build. They are made from a mixture of goatskin, kevlar, polyurethane, and nylon.
Due to the mixture of materials, it means that these gloves are versatile to numerous tasks and conditions. The top skin is waterproof, windproof cut and puncture-resistant. The lining is made with Kevlar and the inner membrane provides further protection.
The glove is ideal for snow and icy condition but wouldn’t be advised for working in torrential rain. The bulkiness means that dexterity would be affected for more delicate tasks.Check It Out
Magid Glove & Safety TRX540W-L T-REX Arctic Series
A pair of winter safety gloves that also offer a cut level of A5. They are water-resistant and offer protection against the cold.
We liked that they offer good comfort and dexterity because of the materials used.Check It Out
Vgo Thinsulate C100 Lined
The VGO winter safety gloves have a longer neoprene cuff with an adjustable velcro fitting strap. Fluorescent windproof and water-repellant back protects against winter conditions and helps visibility.
The front of the glove offers touchscreen fingertips so that cell phones, tablets, and GPS devices can be used without taking the gloves off.
The palm has hand modeling and synthetic leather sections to offer long-lasting comfort.
we found that these gloves had good protection against the cold and still offered a good range in the dexterity department.
These gloves are ideal for construction, warehouse, and manufacturing jobs.Check It Out
Men’s HydraHyde Winter Work Gloves
These gloves are ideal for cold weather construction projects because of the windproof and waterproof factors
Made with a synthetic leather palm that is water-resistant but also breathable. It has an adjustable wrist strap for a better warmer fit. All this enables a glove that has good dexterity and keeping hands comfortable.
The Waterproof inserts make sure that the hands remain dry.
Each glove has reflective piping for visibility in poor conditions.
Touchscreen fingertip technology enables the wearer to still operate their cell and tablet devices without removing the gloves.Check It Out
Ergodyne ProFlex 925CPWP
The Ergodyne Proflex 925 Gloves offer thermal, waterproofing and puncture and impact reducing features all in one glove. Level 3 cut-proof and level 2 puncture protection. There is additional protection on key hand areas of the knuckle, fingers and carpal bone against impacts and blows.
The glove is stitched in a way to offer high dexterity. Ideal for construction work in cold conditions.Check It Out
What Are Winter Gloves?
Winter gloves play an important role in protecting your hands from the extremes of the winter cold. Likewise, you can wear winter gloves when engaging in winter sports such as snowboarding and skiing. Not just any winter gloves are perfect for you. For maximum protection from cold, you’ll need to buy winter gloves that suit the needs. For instance, you can’t wear insulated mittens when going out to ski. It could also be inappropriate to wear softshell gloves meant for cold water sports when you intend to stay indoors during the winter.
How Winter Work Gloves can Help
The primary purpose of winter work gloves is to keep your hands warm. However, the extent to which you are exposed to cold can vary depending on where you are and what you are doing during the winter. For these reasons, different winter gloves have been designed differently and can have varying levels of insulation depending on their application.
Typical winter gloves have one or several layers of insulating material under their fabric. The most often used materials are polar fleece, lambswool, cashmere, softened leather, 3M Thinsulate material, or deerskin leather among many other synthetic materials.
The best winter gloves should be capable of retaining as much heat as possible in the hand. The fabric on top of the insulator is tightly knitted to enhance the heat retaining properties of the insulator below it. The working mechanism is simple; when these gloves are worn, the insulating material and the tightly knitted fabric keeps your hands warm by trapping the air close to your hands and reducing the amount of heat your hands lose to the cold exterior.
Three problems often arise with usual winter gloves: the tendency to overheat, accumulation of sweat, and the bulkiness brought forth by the insulating material and thick fabric. To solve these problems while, at the same time, boosting the thermal efficiency and general comfort of wearing winter gloves, new technologies are starting to be applied to change the working of these gloves.
One such technology can be found in hydrogel and silver nanowire high-tech gloves which have found wide application in the cold weather military units but they’re yet to be rolled out for civilian use. These gloves are made of specially designed hydrogel textile infused with polyester and incorporated with heat-conducting silver nanowires.
The temperature of the augmented textile in these gloves is shot up to 36 degrees Celsius in less than one minute using a battery the size of batteries found in wristwatches.
Types of Winter Gloves
There are five types of winter gloves: fleece gloves, liner gloves, softshell gloves, insulated gloves, and insulated mittens.
1. Fleece gloves
Fleece gloves are made of synthetic fibers that have been tightly knit together to guarantee superior warmth. They are thick in width to increase the level of insulation. The fact that they are not waterproof makes them fit for light duties such as winter cycling but unfit for skiing.
2. Liner gloves
These tight-fitting gloves are normally made from stretchy fabrics with insulating properties such as spandex. They are comfortable to wear and provide sufficient warmth for moderate and high energy activities. If the conditions get colder, you can wear them under heavier gloves such as fleece gloves to boost the insulation. Liner gloves have two advantages: they dry quickly and they’re capable of wicking the moisture away from the skin.
3. Softshell gloves
These gloves are soft, light, and wind-resistant hence they offer satisfactory protection against snow, water, and wind. If you are looking for gloves to wear in moderate to low activity in very low temperatures, soft shell gloves are best for you.
4. Insulated gloves
As you can tell from the name, insulated gloves have an insulator added on them, which can be synthetic fiber or natural materials such as softened leather. Insulated gloves tend to be waterproof yet breathable. These properties make them ideal for extremely low temperatures and wet conditions.
5. Insulated mittens
These gloves are very much like insulated gloves except that they don’t separate the fingers I.e. they consist of two sections, the thumb and the larger remaining part which accommodates all the four remaining fingers. Insulated mittens allow ample blood circulation in fingers which helps keep your hands warm. This and the fact that they are insulated makes them ideal for extremely cold conditions.
How to Choose the Best Pair of Winter Gloves
1. What’s the makeup of the gloves?
True winter gloves are multilayered and the exact number of layers can depend on what they are designed to protect the wearer from. A typical pair of winter gloves come with 2 layers: outer waterproof layer made from leather, nylon or similar materials and inner insulation layer made from material such as ThinsulateTM and acrylic.
2. Consider the 4 factors of insulation
– What is your gender?
– What’s your age?
– What’s your activity level?
– What’s your BMR (basal metabolic rate)?
Men tend to produce more heat compared to women, the same applies to folks in their 20s vs folks above 40 years. Your BMR and activity level determines how easily you sweat. So if you are prone to producing too much heat, it makes sense to buy winter gloves with less insulation.
3. Where are you located?
Winters aren’t the same all over the world. Consider your location’s environmental conditions when choosing winter gloves. Such factors as the lowest monthly temperature, elevation, and humidity should influence your choice. For instance, winter on the east coast of the U.S. tends to be more humid with heavier and wet snow and temperatures ranging between 16 degrees F and 24 degrees F.
Care and Maintenance of Winter Gloves
It is recommended that you care for your winter gloves after every use
1. Do not keep wet winter gloves overnight
2. If non-waterproof winter gloves get wet, consider drying them naturally more so if they are made from leather
3. Once your gloves have dried, polish them using a microfiber cloth
4. Keep your gloves away from sharp objects that might picture them and ruin the insulation or waterproofing material
5. Once in awhile, clean your textile winter gloves with a recommended textile spray
6. Never wash your leather winter gloves using the home washing machine, also never use strong solutions or solvents to wash the leather
7. If your gloves are made from leather, keep them away from direct sunlight and other sources of heat
8. Do not wring or twist your gloves no matter what they’re made from
9. Wash your waterproof work gloves with a spray of hydrogen peroxide or alcohol
10. If your winter gloves become smelly, consider sprinkling corn starch or baking soda on the side and hang them in a dry place overnight